Alshor Plus – Aluminium Shoring
The innovative connection of frame to leg using blades and latches means a frame can be fixed in 10 seconds, minimising erection and dismantle times. Leg to leg connection is made using a boltless snap-fix spigot reducing erect and dismantle times still further.>
The integral load release feature on the long jack allows the leg load to be struck with a single hammer blow, shortening the jack by 12mm. Jacks can then be lowered further by rotating the screw collar to provide adequate clearance to the cast soffit.>
Fixed Leg Pockets
500mm spaced pockets means no measuring or checking of frame position when setting out. Fixed pocket locations ensure the erected structure is straight, reducing operator error, enhancing performance and improving safety.>
The long jack incorporates a spherical base which allows a tilt of up to ten degrees in one direction and two degrees in the other, eliminating load eccentricity by accommodating cross falls in slabs.>
A four start thread allows rapid jack adjustment with every three hundred and sixty degree rotation. Unique extruded grooves provide a self cleaning feature and also prevent the jack from rotating during adjustment and striking of the load. The integral measuring tape enables easy length setting and levelling, reducing assembly time.>
The 1250mm long jack extension range reduces the requirement for leg changes between building levels meanwhile less labour and equipment is required.>
What would you like to do next?
For further information please call our Branch Network via our 1800 No.
If you have an questions or comments or would like further information relating to our products and services please do not hesitate to contact your local branch.
RMD Branch Network
09 259 0353
Contact RMD Branch Network
If you have any questions or comments or would like any further information relating to our products and services please do not hesitate to your local branch.